Register Password; Fingerprint Registration - Hafele Series 7000 User Manual

Register password

Change password
Change password in the same way as above.
When registering new password, previous password is automatically deleted.
Make sure that a door keeps being open when registering/changing password.
Default factory password is set to "1234". Please update the password after installation.
Caution
Register touch key and card/key tag
Delete touch key and card/key tag
1. Open battery cover of indoor body.
3. Press 0 twice on outdoor keypad.
If deleting a touch key (Card/Key tag), all registered touch keys (Cards/Key tags) will be deleted.
It is required to register new touch key (Card/Key tag) after deletion.
For card/key tag model, please use and register only card/key tag provided by us.
Caution
We are not liable for any security incident if user uses other cards or tags (Such as traffic card, credit card, etc)
rather than dedicated card/key tag.

Fingerprint Registration

Before opening After opening
and closing the and closing the
fingerprint cover fingerprint cover
The fingerprints of infants in the developmental stage or some users with unique fingerprints (those which cannot
be registered) may not be recognized.
Scanning foreign substance (sweat and moisture)-stained fingerprints or dry fingerprints may lead to failure to
recognize fingerprints.
Stay clean the fingerprint input unit so it is not stained with foreign substances and do not use a wet finger.
Caution
If fingerprint recognition is not successful, input and use the fingerprints of another finger.
Registered fingerprints may be also registered in a duplicate manner.
Make sure that door is open when checking password registration)
(
1. Open battery cover of indoor body and press Input button (
2. Enter password to register. Password should be 3-19 digits.
3. Press button to complete (Ding dong sound when successfully registered)
Please perform the next steps (Within 15 seconds) before the lamp is turned off.
1. Open battery cover of indoor body and press Input button (
2. Touch each touch key or card/key tag on external input area.
Up to 1-50 touch keys or cards/key tags can be registered.
3. Press button to complete
(Ding dong sound when successfully registered / three beeping sounds when failed)
(Applied model with touch key and card/key tag)
2. Press Input button. (Beeping sound)
4. Press button to complete.
(Applied model with fingerprint input)
1. Open battery cover of indoor body and press Input button (
2.
Push the cover of the outside fingerprint input slightly from right to left.
Place your finger to be registered with the fingerprint module gently on the unit and
input the fingerprints primarily (Beeping sound).
Once the sound goes off, take off the finger and re-input the fingerprints secondarily
(Two "beeps" sound).
Once the beep sounds go off, take off the finger and re-input the fingerprints thirdly
("ppiririck" sound).
Maintain the contact state until the sound comes to an end.
3. Press the " " button to complete your registration.
(success sound: "ding dong dang"/ failure sound: two "beeps").
Upon failure, restart from the beginning.
Up to 1 to 200 fingerprints can be registered.
(Applied model with touch key and card/key tag)
). (Beeping sound)
) . (Beeping sound)
). (Beeping sound)