Removing Validations From A Sub Field; Swift External Message Ui - BEA SWIFT Adapter User Manual

Removing Codes
You can use the ' ' button to remove an existing Party Identification code. Note
that atleast one code should be present for a Party Identification Code validation.
Note:
You can use the ' ' and '
See Also:
Specifying properties common for all validations
Adding validations for a sub-field

Removing validations from a sub field

Removing Validations from a Sub Field
1. Select the swift sub field and click the Validations button.
2. In the validations table of the Swift Field Validations dialog box, select the
validation(s) that are to be removed.
3. Click the 'Remove Validation(s)' button '
See Also:
Adding validations for a sub-field

SWIFT External Message UI

The following properties can be specified in the SWIFT External Message UI.
Format Name. This refers to name of the external format.
(MT543ExternalMessage)
Version.
Standard Name. This refers to the actual name of the SWIFT message. (MT543)
Standard Version. This refers to the SRG version based on which the message
was created. (SRG 2005)
Detailed Name. This refers to the detailed name of the SWIFT message. (Deliver
Against Payment)
' buttons to move code(s) up/down.
' to remove the selected validation(s).