Table of Contents
Advertisement
In MT567, sub-field 'Amount' in field 19A has a validation that the number of digits
following the comma must not exceed the maximum allowed for the specified
currency. For this field, Decimal validation can be added as shown below.
See Also:
Specifying properties common for all validations
Adding validations for a sub-field
Removing validations from a sub field
Adding Party Identification Validation
Party Identification is applicable in cases where a party can be identified using a
set of predefined groups. The predefined groups can be specified as codes.
1. Add a new validation.
2. Select 'Type' as 'Party Identification' in the 'Type' column.
3. The error code will be automatically set as 'T78'. You need not change it.
4. Specify 'Field Options', 'Null Field' and 'Comment' properties as specified earlier.
Specifying Party Identification Codes
The list of codes for the sub field is listed in the 'Party Identification Codes' Table.
You have the option to set a code as New Group and you can also make a code
Mandatory by checking the required check-box as shown below:
Advertisement
Table of Contents
Need help?
Do you have a question about the SWIFT Adapter and is the answer not in the manual?