Swift Sequence; Sequence Without Delimiters - BEA SWIFT Adapter User Manual

Removing validations from a sub field

SWIFT Sequence

A Sequence is a group of related information, delimited in most of SWIFT message
formats. However, there are a few formats, which have sequences without
delimiters. The Designer provides for creating sequences with or without delimiters.
Furthermore, the sequences with delimiters either have only the start delimiter, or
both the start and end delimiters, depending on the format's specification. An
example of each of the three cases is as follows.
See Also:

Sequence Without Delimiters

Sequence With Start and End Delimiters
Sequence With Start Delimiter
Sequence Without Delimiters
Consider the message MT101. An extract of the format is given below.
Status Tag
Mandatory Sequence A General Information
M 20
.......
.......
O 25 Authorisation
----->Mandatory Repetitive Sequence B Transaction Details
M 21 Transaction Reference
O 21F F/X Deal Reference
......
......
O 36 Exchange Rate
Field Name
Sender's Reference
Content/Options
16x
35x
16x
16x
12d