Troubleshooting - Sanyo CLT-E23 Instruction Manual

UP383BA_0.book Page 78 Thursday, May 26, 2005 10:48 AM
ADDITIONAL INFORMATION
• Use only the specified Sanyo battery pack.
• Do not remove the battery from each handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.
Symptom
• Make sure the AC adapter is plugged into the base (or the charger (for multi-
The charge LED won't
handset packs)) and wall outlet.
illuminate when the
• Make sure the handset is properly seated in the cradle.
handset is placed in
• Make sure the charging contacts on the handset and the base (or the charger (for
the cradle.
multi-handset packs)) are clean.
• Move the handset and/or base to a different location away from scratchy metal
objects or appliances and try again.
The audio sounds weak.
• Make sure that you are not too far from the base.
[ E 7 8 ] A d d i t i on a l In f o rm a t io n
Caution
Suggestion