Sanyo CLT-E23 Instruction Manual page 82

UP383BA_0.book Page 80 Thursday, May 26, 2005 10:48 AM
ADDITIONAL INFORMATION
Symptom
• The handset was picked up before the second ring.
The Caller ID does not
• The call was placed through a switchboard.
display.
• Call your local telephone company to verify your Caller ID service is current.
Voice Message
• Contact your local telephone company to make sure that your telephone receives
Indication does not
FSK or SDT message signaling.
work.
• Charge the battery pack for 15-20 hours.
You cannot register the
• Remove the base ID (see "Replacing the Base Setting" on page E34) and register
handset at the base.
the handset (see "Register the Handset to the Base" on page E68).
• Remove the base ID (see "Replacing the Base Setting" on page E34) and register
The handset doesn't
the handset (see "Register the Handset to the Base" on page E68).
communicate with the
other handsets.
• Make sure that you have registered all handsets.
An extra handset can't
• There are 2 handsets already using the 3-way conference feature.
join the conversation.
You cannot make an
• Make sure that the receiving handset is not in use.
intercom call with
another handset.
[ E 8 0 ] A d d i t i on a l In f o rm a t io n
Suggestion