Setting Up The Menu - Sanyo CLT-E23 Instruction Manual

UP383BA_0.book Page 25 Thursday, May 26, 2005 10:48 AM
GETTING
STARTED

Setting Up the Menu

Entering the Menu
1) Press the del/menu key in standby mode.
2) Use vol/ or vol/ to move the pointer to a desired main
menu (Walkie-Talkie Mode, Room Monitor, Handset Setup,
Global Setup, and System Reset).
3) Press /select to select the desired main menu.
4) Use vol/ or vol/ to select a desired submenu, and then press
In the submenu, use vol/
Press /select to confirm your selection. For detailed instructions, see the following
sections for the desired submenu.
5) To exit the menu, press end or place the handset to the cradle.
Walkie-Talkie (Direct-Link) Mode (For Multi Handsets)
Using the Walkie-Talkie Mode
1) Enter the Walkie-Talkie Mode menu.
appears.
m o de pr e ss [ S EL E CT ]
or vol/ to select an item.
To en te r Di re ct Li n k
G e t t i n g S t a r t ed [ E 2 5 ]
/select to enter.