Redialing A Call - Sanyo CLT-E23 Instruction Manual

UP383BA_0.book Page 38 Thursday, May 26, 2005 10:48 AM
BASICS

Redialing a Call

The last three phone numbers dialed can be quickly redialed.
Notes:
• If the number exceeds 32 digits, only the first 32 digits are
retained in redial memory.
• If the redial memory is empty, you will hear a beep.
Redialing from Standby Mode
1) Press redial/pause in standby mode.
2) Press redial/pause again. Each press of
will display one of the last three number redialed.
3) Press talk/flash or speaker. The selected number is dialed.
4) To hang up, press end.
Redialing from Talk Mode
1) Press talk/flash or speaker.
2) Press redial/pause. The last number dialed will be
displayed and redialed. To hang up, press end.
Note:
Redialing from Talk Mode will only display the last number dialed. Use redialing from Standby
Mode to display the other two numbers.
[ E 3 8 ] B a s i cs
redial/pause
redial/pause
redial/pause
redial/pause