Features; Phonebook; Character Chart - Sanyo CLT-D6220 Instruction Manual

MENU CHART (Continued)
2.
SETUP FLASH TIME
(Continued)
LANGUAGE
CONTRAST
REGISTER
TIME FORMAT
SET TIME
SET DEFAULT
3.
PROFILE HS RINGER MUSIC
HS RINGER VOLUME
PAGE TONE
KEY TONE
4.
FUNCTION NO DISTURB
ALARM 1
ALARM 2
5.
CALL LOG MISSED CALL
RECEIVED CALL
DIALED CALL
15

FEATURES

SHORT (100mS)

Phonebook

MEDIUM (300mS)
This is a one touch access key to go directly into PHONEBOOK instead of pressing
LONG (600mS)
PHONEBOOK. The handset can store up to 100 phone numbers in its memory. You can dial a stored
number simply by pressing
ENGLISH
FRENCH
To store numbers in memory:
SPANISH
1.
Press
LEVEL 1 - 8
The dial pad lights.
Press
NEW REGISTER
Press
DEREGISTER
SELECT BASE
2. To input a name for this number, use the method below. See the character chart on page 17 for
input reference.
12 HOUR
for example, enter a name "ALICE":-
24 HOUR
Press "2" once, the display will show "A".
Wait a couple of seconds, the cursor will start to blink on the next digit.
Press "5" three times, the display will show "AL".
Press "4" three times, the display will show "ALI".
Press "2" three times, the display will show "ALIC".
DEFAULT
Press "3" twice, the display will show "ALICE".
VIP
FAMILY
NOTE: To switch between upper case and lower case, press the
FRIEND
COLLEAGUE
Press
3.
The display will show "INPUT NUMBER".
6 LEVELS
4 MELODY
4. Dial the phone number you would like to store using the handset keypad.
TONE
MUSIC
Up to 24 digits can be stored. (a pause counts as one digit).
OFF
1 - 16 HOURS
5. Press
OFF
If the input name already exists, the display will show "OVERWRITE". If you want to overwrite,
press
NOTE:
- If you want to input a space, press "0" once.
- If you make an error inputting a name of number, press
may then re-enter the correct name or number.
- When the memory is full, you will hear an error tone and the display will show "MEMORY FULL".
You cannot store any more numbers unless you delete some of them from memory.
, select phone number and then press
.
to go into ADD.
MENU
again to start inputting a name (up to 16 characters).
MENU
to confirm.
MENU
to confirm.
MENU
again. Otherwise press to exit.
FLASH
MENU
Back
MUTE
CLEAR
16
then
MENU
.
key.
to go to the previous digit. You