Monitoring Display Adjustment - Sanyo VMC-L1015 Instruction Manual

Monitoring display adjustment

Adjustment method for
Operation
MENU AUTO
MENU
1 2
Adjustment item
Item
Color Adjust the color.
Tint Adjust the tint (only available for NTSC signal).
Brightness Adjust the brightness.
Contrast Adjust the contrast.
Sharpness Adjust the sharpness.
Volume Adjust the volume.
H-Position Adjust the horizontal position of the display.
Language Select the language of the display.
Color Temp. Select the color temperature.
Scan Select the image scan type.
Select to use Picture in Picture, showing an additional smaller
PIP
display in the upper left corner.
Pressing the +, – buttons together will return the settings to the
Recall
default setting.
* May differ depending on location of purchase.
• The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings will return to default.
• The default language display is English. If the language setting is changed, the menu display will be in the language chosen.
: Composite/
1
Press the adjustment control (MENU).
R At the top of the screen, an adjustment panel as shown in the diagram
2
Choose the adjustment item.
Down
MODE POWER
3
Change the setting value.
4
If necessary, repeat
3
steps 2 and 3.
Description
: S-Video signal selection
to the right will be displayed.
Up
• Pressing the adjustment control (MENU) again, or waiting for a number of
seconds will cause the adjustment panel to disappear.
– 6 –
Adjustment item
Composite In
Color
Tint
Brightness
Contrast
Sharpness
Volume
H-Position
Language
Color Temp.
Scan
PIP
Recall
Parameters Default setting
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
0 – 51
English, Chinese,
French, German,
Spanish, Italian,
Japanese
° °
9300 K, 6500 K,
Standard
Over, Under, Full, 1:1
VGA, Off
–
Setting value
NTSC
30
25
25
25
27
30
25
English
9300K
Full
Off
30
25
25
25
27
30
25
English
°
9300 K*
Full
Off
–