Names Of Controls/Parts - Sanyo VMC-L1015 Instruction Manual

Names of controls/parts

Front view
Rear view
Audio-Out terminal
(AUDIO OUT)
For audio output.
Audio-In terminal
(AUDIO IN)
For audio input.
Viewing area
Adjustment control (MENU)
For fine adjustment. (Pages 6, 7)
For adjusting the screen contrast.
(Page 5)
• Select the appropriate menu item.
MENU
Brightness adjustment control
Adjusts the brightness of the screen. (Page 5)
• Select the appropriate menu item.
DC IN
VGA IN
BNC IN
BNC OUT
Y/C IN
Y/C OUT
AUDIO OUT AUDIO IN
Automatic display adjustment control
(AUTO)
Automatically adjusts the screen
(for use with VGA connections). (Page 5)
Contrast adjustment control
Volume adjustment control
Adjusts the volume level. (Page 5)
• For adjustment, change the setting value.
Power input terminal (DC IN)
VGA signal input terminal (VGA IN)
For the input of a computer
VGA (Video Graphics Array) signal.
Composite signal input terminal
(BNC IN)
For the input of CCD camera surveillance image
signal.
Composite signal output terminal
(BNC OUT)
Sends the image to BNC IN.
S-Video signal input terminal (Y/C IN)
For the input of S-Video signal.
S-Video signal output terminal
(Y/C OUT)
For the output of S-Video signal.
Pin number
– 3 –
Power button (POWER)
Turns the power on or off.
AUTO MODE POWER
Power indicator
light
Input mode control (MODE)
Changes the input mode. (Page 5)
4 IN
Signal
1
GND (Y)
2
2
GND (C)
OUT
4
3
Y
4
C
2
(Page 4)
3
1
3
1