VTech VM343-2 Quick Start Manual

Go to www.vtechphones.com VM343-2
to register your product for
enhanced warranty support
and latest VTech product news.
Quick start guide

Connect and power on - Baby unit

More than 1 meter
>
1m (3ft)
(3 feet)

Change different views - View

Press VIEW to switch between the image of baby units and .
Press VIEW
What's in the box
Install the battery

Change different views - Patrol

Press PATROL to alternately view the image from baby units and every 10 seconds.
10s
VM343-2 baby monitor system
Baby's room

Connect and power on - Parent unit

THIS SIDE UP
>
1m (3ft)
CAUTION
• The default volume of your parent unit
is level 4. If you experience high-pitched
screeching noise from your baby monitor
< while positioning:
1m (3ft)
-
-

Change different views - Split

Press SPLIT to view the images from all baby units at once.

Status check

Once you power on your baby monitor, your parent unit displays image from baby unit
light turns on.
2s
The ON/OFF LED light of baby unit
Make sure your baby units and parent unit
are more than 1 meter (3 feet) apart, OR
Turn down the volume of your parent unit.

Dim mode

With dim mode preset to on, your parent unit display will dim after 10 minutes of inactivity to conserve energy.
Living room
, and the LINK LED
turns on. As baby unit is not being viewed, its ON/OFF LED light flashes.
10 min inactivity
Press any buttons