Blockage Related - Pelpro PP70 Owner's Manual

Troubleshooting

Blockage Related

Fire starts but goes out
• Confirm firebox is clean and clear (Zone 1)
- Ensure fire pot holes are clear
• Inspect Stove body (Zone 2)
- Confirm exhaust probe is connected
- Inspect and clean the exhaust outlet
• Confirm exhaust path is clean and clear (Zone 3)
Starts and stops frequently in automatic mode
• Determine if your room is experiencing varying temperatures due to repeated opening/closing of doors or
windows—correct if necessary
• Examine Stove body (Zone 2)
- Inspect ambient probe and confirm that at least 2" is exposed outside of Stove body
Slow or smoky start-up and/or lazy flame
• Confirm exhaust path is clean and clear (Zone 3)
• Examine Stove body (Zone 2)
- Align igniter so it is properly placed and centered
- Review fuel quality (see Pellet Fuel information on page 13)
pelprostoves.com PelPro Pellet Stove • 7103-171C • 11/1/18
Zone Zone
1 1
Zone Zone
2 2
31