Comfort Settings; Trim Adjustment - Pelpro PP70 Owner's Manual

Using Your Stove

Comfort Settings

Control your comfort with a single dial:
• OFF setting - Used to turn your Stove off
• LO setting – Your Stove will continue to run on low regardless of room
temperature. LED light will be steady amber
• 1 through 10 settings – Set to your desired comfort level. Once the desired
comfort level is achieved the Stove will automatically shut down. When the
temperature in the room drops below the desired comfort level, your Stove
will automatically restart.
• HI setting - Your Stove will continue to run on high regardless of room temperature. LED light will be steady amber.
Pro Tip
If the dial control is turned to the off position and then back on, even if by mistake, your Stove will go through
the shutdown process (approximately 15 minutes) and restart.

Trim Adjustment

Trim adjustment is the small dial located below the main dial control. Rotating this dial will adjust the air/fuel ratio and
below are examples of when to use it:
• If the fire is too large, lazy or producing black soot, rotate the dial counterclockwise one level at a time and allow 15
minutes for stabilization before making another adjustment
• If your fire is too small and sometimes goes out when there are pellets in the hopper, rotate the dial clockwise one
level at a time and allow 15 minutes for stabilization before making another adjustment.
Thermostat
Your PelPro Stove comes with a built-in thermostat system that provides easy temperature adjustments. The
Stove is not designed to use a remote control or external thermostat.
pelprostoves.com PelPro Pellet Stove • 7103-171C • 11/1/18
5
5
4
4
6
6
3
3
7 7
2
2
8
8
1
1
9
9
LO
LO
10
10
OFF
HI
OFF
HI
Trim
Adjustment
19