Worcester Sense ll Operating Instructions Manual page 11

Operating the appliance
Changing the room temperature until the next switching time
▶ Turn the selector to set the required room temperature.
The corresponding time slot is displayed in bold in the time program bar chart.
▶ Wait a few seconds or press the selector.
The controller operates with the modified setting. The change applies until the
next switching time in your heating system time program is reached. After this,
the time program settings are restored.
Undoing a temperature change
▶ Turn the selector until the corresponding time slot is no longer displayed in bold
in the time program bar chart and press the selector
-or-
▶
– Press the man key.
– Wait a few seconds or press the selector to close the pop-up window.
– Press the auto key.
The change is undone.
Setting a constant room temperature for a limited period of time
▶ Press and hold down the man key until the input field for the duration of manual
operation is displayed.
▶ Turn the selector to set the required duration.
The maximum limited duration for manual operation is approx. 48 hours
(2 days) from the current time.
▶ Press the selector.
The controller operates with the modified settings.
If manual operation ends at the set time, the active time program is restored.
Cancelling limited duration for constant room temperature
▶ Set the duration to more than 48 hours ( setting a constant room temperature
for a limited period of time).
-or-
▶
– Activate automatic mode (press auto key).
– Wait a few seconds or press the selector to close the pop-up window.
– Activate manual operation (press man key).
Manual operation is active permanently (constant room temperature for an
unrestricted period of time).
Table 7 Getting started – Room temperature
Sense ll – 6 720 812 775 (2014/10)
Getting started
Result
6 720 815 237-06.1O
6 720 815 237-07.1O
11