SMC Networks HRR012-A*-20 Series Operation Manual page 22

HRX-OM-W004
Chapter 2 Contact input/output communication
Set value
No output signal
Operation status signal output
Remote status signal output
Unused
Ready completion (TEMP READY) signal output
TEMP OUT (temperature is out of the range) signal output
FLT (operation stop) alarm signal output
WRN (operation continue alarm) signal output
Notice for maintenance signal output
Alarm status signal output
Pass through signal of the contact input signal 1
Pass through signal of the contact input signal 2
Selected alarm status signal output
Selected notice for maintenance signal output
Contact output signal 3 operation
17.
Press the [▼] key. Displays screen for setting the operation of the Contact output
signal 3.
Contact output signal 3 operation
Contact output signal 3 select alarm
18.
Press the [▼] key. Displays screen for setting the selected alarm of Contact output
signal 3. The alarm is valid when the "selected alarm status signal output" is active.
Select the alarm No. to be allocated to Contact output signal 3
●Setting range: AL.01 to AL32 (Initial value: AL01)
2.4 Setting and checking
2-10
Explanation
Contact output signal 3 operation
DOUT ⇒ TYPE( Alternately displayed )
Set value Contents
N.O. type
A
N.C. type
B
Contact output signal 3 selected alarm No.
DOUT3 ⇒ ALARM ⇒ CODE( Alternately displayed )
(Default setting)
Initial value
―
○
Initial value
―
―
―
―
―
―
―
―
―
○
―
―
―
―
HRR Series