SMC Networks HRR012-A*-20 Series Operation Manual page 19

Set value
No output signal
Operation status signal output
Remote status signal output
Unused
Ready completion (TEMP READY) signal output
TEMP OUT (temperature is out of the range) signal output
FLT (operation stop) alarm signal output
WRN (operation continue alarm) signal output
Notice for maintenance signal output
Alarm status signal output
Pass through signal of the contact input signal 1
Pass through signal of the contact input signal 2
Selected alarm status signal output
Selected notice for maintenance signal output
Contact output signal 1 operation
9.
Press the [▼] key. Displays screen for setting the operation for the Contact output signal 1.
Select the Contact output signal 1 operation.
Contact output signal 1
10.
Press the [▼] key. Displays screen for setting the selected alarm for the Contact output
signal 1. The alarm is valid when the "selected alarm status signal output" is active.
Select the alarm No. to be allocated to Contact output signal 1
●Setting range：AL.01～AL.32(Initial value：AL.01)
HRR Series
Explanation
Contact output signal 1 operation
DOUT ⇒ TYPE( Alternately displayedd )
Set value Contents
N.O. type
A
N.C. type
B
selected alarm
Contact output signal 1 selected alarm
DOUT1 ⇒ ALARM ⇒ CODE( Alternately displayed )
Chapter 2 Contact input/output communication
Initial value
○
―
No.
HRX-OM-W004
Initial value
(Default setting)
―
○
―
―
―
―
―
―
―
―
―
―
―
―
2.4 Setting and checking
2-7