SMC Networks HRR012-A*-20 Series Operation Manual page 21

Select the contact output signal 2 operation.
Contact output signal 2 selected alarm
14.
Press the [▼] key. Displays screen for setting the selected alarm for the Contact output signal 2.
The alarm is valid when the "selected alarm status signal output" is active.
Select the alarm No. to be assigned to contact output signal 2.
●Setting range：AL.01～AL.32(Initial value：AL.01)
Contact output signal 2 Select maintenance
15.
Press the [▼] key. Displays screen for setting the selected maintenance of the Contact
output signal 2. The alarm is valid when the "selected maintenance status signal output" is
selected.
Select the maintenance alarm No. to be allocated to Contact output signal 2.
● Setting range: MT.01 to MT.05 (Initial value: MT.01)
Contact output signal 3 Select function
16.
Press the [▼] key. Displays screen for setting the function of the Contact output signal 3
Select contact output signal 3 function
HRR Series
Set value Contents
A N.O. type
B
N.C. type
Contact output signal 2 selected alarm No.
DOUT2 ⇒ ALARM ⇒ CODE( Alternately displayed )
Contact output signal 2 Selected maintenance alarm No.
DOUT2 ⇒ MANT ⇒ CODE( Alternately displayed )
Contact output signal 3 function
DOUT3 ⇒ SEL( Alternately displayed )
Chapter 2 Contact input/output communication
Initial value
○
―
HRX-OM-W004
2.4 Setting and checking
2-9