Table of Contents
Advertisement
Why am I not receiving E-mail alert messages?
Q
Make sure that the registered E-mail address and SMTP server address are cor-
A
rect. If the SMTP server is located in your LAN (Local Area network), the
address should be set to the SMTP server in your LAN. The SMTP server locat-
ed outside of your LAN may not be available for security reason. For further
information please contact your network administrator (p.32).
It may be required for the authentication depending on the SMTP server. This
product does not support this kind of SMTP server.
Others
Can I develop a driver to control external serial equipment?
Q
This product does not provide any driver software. To control the external
A
equipment connected to the extra serial port, it should be required to clarify the
commands and communication condition defined by each equipment. If they
are clarified, it can be controlled by using the Telnet application installed on your
computer. Please see chapter "Use of telnet"(p.62).
Can I update the firmware of the Network Unit.
Q
It is possible to update the firmware
A
through the network. It is required
to have a special tool for the updat-
ing. For further information please
consult your local dealer. The ver-
sion number of the firmware is indi-
cated on the lower part of the"Initial
Setting" page.
Appendix
87
Network Unit
OWNER'S MANUAL
Advertisement
Table of Contents
