Product Specification - Sanyo PJ-NET ORGANIZER POA-PN10 User Manual

Pj-net organizer
Table of Contents

Advertisement

Product specification

Type ......................................PJ-Net Organizer
LAN interface ........................Applicant regulation IEEE802.3 (10Base-T)
Network protocol ..................TCP/IP specification
Serial interface ......................RS-232C
Computer RGB input ............(VGA) HDB 15-pin Terminal
Power source ........................Supplied from the projector
Power consumption ..............3.0 watts
Dimensions (W x H x D)........6.35" x 1.31" x 3.37" (161.4 x 33.5 x 85.6 mm)
Weight ..................................0.51 lbs (230 g)
Built-in battery ......................Lithium battery, Type CR2032, 3.0V
Operating temperature..........41˚F ~ 95 ˚F (5˚C ~ 35 ˚C)
Storage temperature ............14˚F ~ 140˚F (-10˚C ~ 60˚C)
* The specifications are subject to change without notice.
Applicable projector model list
PLC-XT10A
PLC-XT15A
* The above models are the applicable projectors which can be connected for this product. For
further information please consult your local dealer.
Data transfer speed
data transfer mode
Terminal
Baud rate
0.3/1.2/2.4/4.8/9.6/19.2/28.8/57.6/115.2 Kbps
Flow control
Hardware flow control (RTS/CTS, Xon/Xoff)
Parity check
Odd/Even
Terminal
D sub 9-pin Male
IEEE802.3u (100Base-TX)
10Mbps/100Mbps
Half duplex/Full Duplex
8-pin modular (RJ-45)
TCP/IP
Specifications
77
Network Unit
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Table of Contents