Sanyo PJ-NET ORGANIZER POA-PN10 User Manual page 59

Setting to control the equipment connected to the serial port
from the computer
Serial Control :Selects "External"
Port :Sets according to the com-
puter specified port no. Do
not use port no. 10000*
:Sets according to the com-
Other Settings
munication condition of the
equipment
Setting to control the projector from the serial controller con-
nected to the serial port
:Selects "Projector"
Serial Control
Port :Not specified. Do not use
port no. 10000*
Other Settings :Sets according to the com-
munication condition of
the serial controller
Setting to control the projector from the computer through the
LAN port
Serial Control :Not specified
Port :Not specified
Other Settings :Not specified
* The port no. of the computer must be used with 10000.
*1 This product will restart automatically when the "Port" or "Serial Control" is changed and it
takes about 40 seconds.
*2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is
reserved to control the projector through the LAN port.
Exclusive driver software for control of the external equipment is required. This product does
not provide any driver software. Please consult your local dealer.
There are 2 types of RS-232C serial cable, Normal and Reverse type. Usually, when connect-
ing between this product and a projector or a computer, use Reverse type of serial cable.
When connecting DVD player etc., use Normal type.
.
2
2 .
Serial port setting
59
Network Unit
OWNER'S MANUAL