Setting And Using The Alarm; Setting The Clock - iHome iBTW39 Instruction Manual

Manually Setting Clock + Alarms

Setting the Clock

1. Press and hold the
clock display flashes and a beep sounds.
Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make
2.
sure you set the correct AM/PM time. The PM indicator appears to the left of the display; there is
no AM indicator.
3. To toggle the clock display between standard 12 hour time and 24 hour ("military") time display,
Alarm or
press the
4. Press and release the
flash on the display. Press the – or + Buttons to set the correct year.
5. Press and release the
flash on the display. Press the – or + Buttons to set the correct month (hold for rapid
adjustment).
6. Press and release the
flash on the display. Press the – or + Buttons to set the correct date (hold for rapid
adjustment).
7. Press and release the
time setting mode is complete.

Setting and Using the Alarm

This unit features dual alarms which can be set to di erent times and alarm sources. Each is set in
the same way. Instructions are given as "Alarm Button"; use
located on the back of the unit to set respective alarms.
Note: Each step must be completed while display is flashing or the step will time-out in 10 seconds
without any changes saved.
1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash.
A beep sounds.
2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time. The PM indicator appears to the left of the time
display; there is no AM indicator.
Time Set Button located on the back of the unit for 2 seconds until the
Alarm Button while the display is flashing during time setting.
Time Set Button to confirm the current time setting. The YEAR will
Time Set Button to confirm the current year setting. The Month will
Time Set Button to confirm the current month setting. The Date will
Time Set Button to confirm the date. 2 beeps will sound to indicate
Using the
Alarm Button or
(Continued on next page)
5
iBTW39
Alarm Button