Replacing A Core Switch Blade (Cr16-8); Figure 20 Removal And Replacement Of The Core Switch Blade (Cr16) - Brocade Communications Systems DCX 8510-8 Hardware Reference Manual

3. Label and then disconnect cables from the faulty core switch blade.
4. Open the ejectors by rotating them toward the center of the blade face. Pull the blade out of
FIGURE 20

Replacing a core switch blade (CR16-8)

Complete the following steps to replace the core switch blade.
Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-03
the chassis using the ejectors.
Removal and replacement of the core switch blade (CR16)
Core switch blade (CR16-8) removal and replacement
5
81