Fixing A Read Header Failed Error - Measurement Computing USB-5100 Series Software Help

USB-5100 Series Software Help

Fixing a Read Header Failed Error

Occasionally, when trying to launch, check status, or read out a USB-5100 Series logger, you may receive a
Read Header Failed
communication error or corrupted header.
Complete the following steps to fix this error:
1. Select
Device»Utilites»Force Offload USB Logger
If the Logger Readout
2. When the readout is complete, save the data to a
If you receive a
Read Header Failed
restore the header by launching the logger. This resets the device launch options to factory defaults. However, it
also causes any logged data or offloaded data from a shuttle to be lost.
If you receive a
Read Header Failed
Measurement Computing Corporation to attempt to retrieve the logged data.

Knowledgebase: kb.mccdaq.com

Tech support form:

Email: techsupport@mccdaq.com

Phone: 508-946-5100 and follow the instructions for reaching
error. This error occurs when a device header cannot be read, usually because of a
window displays with the progress bar, the data is being read out from the device.
message again, the header has probably become corrupted. You can
message and are unable to read out data from the logger, please contact
www.mccdaq.com/support/support_form.aspx
.
file.
.hob
Tech Support
51
Hardware Reference