Opening Files; Working With Plots - Measurement Computing USB-5100 Series Software Help

USB-5100 Series Software Help

Opening Files

To open a USB-5100 Series data file
1. Click the Open icon
2. Select one or more files and click
3. Select the series and/or events you wish to view in the plot and click
open, you are prompted with a Plot Setup dialog box for each file (unless you have set the preference to
automatically plot data as described in General Preferences).
To open a USB-5100 Series project file
1. Select File»Open Project
2. Select a project file and click
Recently opened files are listed in the File menu. Select
empty the recent file list, select

Working with Plots

There are four tools available on the toolbar for viewing the plot and isolating data.
Figure 15. Gaps Between Started/Stopped Events
), complete the following steps:
(.hob
on the toolbar or select File»Open Datafile
.
Open
), complete the following steps:
(.hproj
.
Open .
File»Recent Files»Clear Recent Files
1 Arrow tool 3
2 Crosshair tool 4
Figure 16. Plot and Data Tools
30
Reading Out, Plotting, and Analyzing Data
.
Plot . If you selected multiple files to
File»Recent Files and then choose the file to open. To
.
Hand Drag tool
Zoom tool