Stopping A Device - Measurement Computing USB-5100 Series Software Help

USB-5100 Series Software Help

Stopping a Device

A logger automatically stops recording data when the memory is full (unless it has been configured to never
stop logging) or when the battery runs down. Depending on the launch settings selected, you can also press the
Start/Stop Logging button to stop logging on certain logger models. In addition, you can use software to stop
the logger manually at any time.
To stop a logger, complete the following steps:
1. Connect the logger to the computer.
2. Click the Stop icon
After the logger has been stopped, the data remains in the logger until the next launch. Be sure to read out the
logger before setting up the next launch.
on the toolbar, or select Stop from the Device menu.
26
Working with USB-5100 Series Data Loggers