Download Print this page

Measurement Computing USB-525 Quick Start Manual

Logger assistant

Hide thumbs Also See for USB-525:

Table of Contents

Download this manual

Quick Start

USB-525

Logger Assistant

Table of Contents

Need help?

Do you have a question about the USB-525 and is the answer not in the manual?

Page 1 Quick Start USB-525 Logger Assistant...
Page 3  Windows 8/7/Vista/XP (32- or 64-bit) Power on the USB-525 To power on the USB-525, press-and-hold the button on the front of the device until the screen turns on. The USB-525 battery comes approximately 25% charged so you can try the device straight out of the box.
Page 4 Download and view logger data Complete the following steps to download logger data and view the data graphically on the USB-525,: Insert the logger into the USB port on the top of the USB-525. Press Stop Logger & Download Press NEXT to stop the logger.
Page 5 For more information For more information Refer to the following documents for more information about using the USB-525 to configure and view data from supported USB-500 Series data loggers:  USB-525 Logger Assistant section of the USB-500/600 Data Logger Application Help.
Page 7 Other product and company names mentioned herein are trademarks or trade names of their respective companies. © 2015 Measurement Computing Corporation. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic, mechanical, by photocopying, recording, or otherwise without the prior written permission of Measurement Computing Corporation.
Page 8 Measurement Computing Corporation 10 Commerce Way Norton, Massachusetts 02766 (508) 946-5100 info@mccdaq.com www.mccdaq.com *325918B-01* May15 326123B-01 QS USB-525 Rev2...