Miele H6700BM Operating And Installation Instructions page 118

Frequently Asked Questions
Problem
System Lock  appears
in the display when the
oven is turned on.
The oven does not heat
up.
Power Failure - Program
Canceled appears in the
display.
appears in the
12:00
display.
Maximum operating duration
reached appears in the
display.

Fault XX appears in
the display.
The core temperature
cannot be set.
If the door is opened
while using
"Microwave" , the
oven stops making a
noise.
118
Possible cause and solution
The system lock  is activated.
 You can unlock the oven to start a cooking
program by pressing  for at least 6 seconds.
 To permanently deactivate the lock, see "Settings -
System Lock ".
Demo mode is activated.
The oven can be operated but will not heat up.
 Deactivate Demo mode (see "Settings –
Showroom Program").
There has been a brief power failure which has
caused the current cooking process to stop.
 Turn the oven off and then back on again.
 Restart the cooking process.
The power supply was interrupted for longer than 200
hours.
 Reset the date and time.
The oven has been operating for an unusually long
period of time; this has activated the safety shut-off.
 Confirm with OK. Clear the message
by selecting .
Finished
The oven is now ready to use again.
A fault has occurred that you cannot resolve.
 Contact Miele Technical Service.
The roast probe is not recognized by the oven.
 Check whether the roast probe is correctly
plugged into the socket.
If the oven still does not recognize the roast probe, it
must be faulty. A replacement roast probe can be
ordered from Miele.
This is not a fault. If the door is opened while
"Microwave"  is being used, the door contact
switch will turn off the microwave and switch the
cooling fan to a lower speed.
Program