Audi RS 3 LMS SEQ User Manual page 48

Refuelling process:
1. Prepare an external bottle with the desired amount of fuel. It is recommended using a ground cable
on the bottle to avoid static electrical discharges.
2. Open the fuel tank cover, connect the refuelling hose with the socket to the fuel tank plug (#1 on
the picture below) and the fuel will flow inside.
3. Set the fuel level display with the fuel amount inside the tank. This value will be shown also on the
AIM MXG display. For more info about the fuel level display check point 3.5 above.
Fuel tank placed on the car:
1. Fuel tank refill plug
2. Fuel pump connector
3. Battery supply
4. Fuel level display
Fuel draining tools:
On the car there is a FIA fast coupling plug placed on the engine bay ready for safe draining use.
There are two tools available on the Spare Parts Catalogue. First, there is a contra-connector D-6 socket
available to connect in the fuel line plug that opens the circuit for draining.
1
3
4
2
48