Audi RS 3 LMS SEQ User Manual page 51

Airjack dismounted view:
Notes:

Maximum air pressure is 30 bar.

Inlet thread of the airlance is M16x1.5

IMPORTANT: never work under a vehicle supported only by airjacks unless safety props are fitted.

Jacks must be vertical during operation. Mounting brackets or clamps to be fitted to threaded
section of body only. Do not loosen or remove the adaptors.

Do not use petrol or paraffin for cleaning the airjacks as this will damage the rubber seals. Use an
alcohol based cleaning fluid and silicone spray or silicone grease when internal lubrication is
necessary.
51