Workshop Maintenance - Audi RS 3 LMS SEQ User Manual

5

WORKSHOP MAINTENANCE

First roll-out
Audi Sport checks all the cars in a roll-out before customer delivery. This roll-out consists in:

5 circuit laps.

High speed in a long straight.

Start rev limiter checking simulating a standing start.

Speed limiter function checking.

After the roll-out, Audi Sport engineers check the data acquisition and all car functions.
Note:

Although Audi Sport does a roll-out, it is strongly recommended to carry out a suspension check
before first customer roll-out and after the first practice. Pay speciall attention to sub-frame, power
train, engine brackets, fixations, etc.
Check-list
After any rebuild or main job is recommend to carry out a check-list. It is possible to do it using the Live
Measures view in RaceStudio3 and a lap top or directly using car's display.
Oil level
ENGINE
Coolant level
BRAKES Brake fluid
CLUTCH Clutch fluid
FCY
Cockpit fan
Display change
Safety brake signal
STEERING
High beam / Flash
WHEEL
Wiper
Windscreen water
Rain light
Starter
AIM Live
T_WATER
Fan
P_ENG_OIL (WT<25°C)
P_ENG_OIL (WT>25°C)
ENGINE
P_FUEL
Battery voltage
Boost pressure
Speed limiter
Tip
Gear display
GEARBOX
Potentiometer values
P_CLUTCH
FLAG_FBX_1
FLAG_FBX_2
FUSEBOX FLAG_FBX_3
FLAG_FBX_4
FLAG_FBX_5
Check-list with engine stopped
On the dipstick mark / T_oil > 70⁰C
On the bottle mark
On the bottle mark
On the bottle mark
Steering wheel functions
Check-list with engine at idle speed
87°C / 92°C (thermostat cycle)
Active at 92°C
4 bar
2,5 bar
> 4,1 bar
> 13,5 volts
0,3 bar @ 2500 rpm
Check all speed limits
0
0
0
0
0
OK
OK
OK
42