Standing Start Procedure; Rear Brake Pressure Proportioning Valve - Audi RS 3 LMS SEQ User Manual


It is not necessary to use the clutch while shifting on the track, only to start from standing position.

Once the vehicle is moving use the steering wheel paddles to upshift or downshift.

Remember that the shifting is only manual, when the engine reaches the rev limiter (6800 rpm) the
power is limited but no automatic upshift will happen. To stop the car it is necessary to press the
clutch pedal to avoid engine stalling.

Downshifting is protected preventing the engine from over-revs. If there is a downshift demand at
too high revs the gearbox will not do it. There is no memory function.
Parking mode:

Use the Neutral gearbox mode and lock manually the hand brake using the locking hook. The
gearbox will not be locked, only the car due to the rear brake pressure generated by the hand brake
pump.

To unlock the car just remove the hand brake hook.

To lock the transmission completely, stop the car on 1

Standing start procedure





Rear brake pressure proportioning valve


st
or R gear.
14