Other Devices And Connections; Connecting To A Tv - Sanyo Xacti VPC-CG65EX Instruction Manual

CONNECTING TO A TV

Connect the supplied AV interface cable from the AV terminal on the camera
to the AUDIO and VIDEO input terminals on the TV.
Yellow plug:
To the VIDEO input
terminal
Switch input
to VIDEO
Playback
i After connecting the camera to the television, set the TV input switch to
VIDEO input.
i When an AV interface cable is connected, no image appears on the
camera's monitor.
i The playback method is the same as when viewing images on the
camera's monitor.
i The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
Audio playback: see page 57
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
151
English
To open the AV terminal cover
1 Pull towards
the front of
the camera.
Supplied dedicated AV
interface cable
White plug:
To the AUDIO input (L) terminal
Red plug:
To the AUDIO input (R) terminal
2 Rotate
AV terminal
To the AV terminal
on the camera