Manually Add, Remove, Or Change The Information For A Device On A Mac Acl - NETGEAR SXR80 User Manual

Orbi Pro WiFi 6 Router SXR80 and Orbi Pro WiFi 6 Satellite SXR80
The devices are added to the MAC ACL on the MAC ACL page. Devices on the MAC
ACL are an exception to the default policy:
• If the default policy of the MAC ACL is to allow access, the added devices are
denied access.
• If the default policy of the MAC ACL is to deny access, the added devices are
allowed access.
Manually add, remove, or change the information for a
device on a MAC ACL
After you set up a MAC ACL for a network and specify the default policy for the MAC
ACL, you can manually add a device, remove a device, or change the name (but not
the MAC address) for a device on the MAC ACL.
By manually adding a device, you can proactively control access for a device that is not
or not yet detected, or that was not detected by the router.
To manually add, remove, or change the name for a device on a MAC ACL:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > MAC ACL.
The MAC ACL page displays.
5. Go to the section for the network for which you want to manage the MAC ACL.
The first section is for the admin WiFi network, the second for the employee WiFi
network, the third for the IoT WiFi network, the fourth for the guest WiFi network,
and the fifth for the wired network.
6. To manually add a device to the MAC ACL, do the following:
a. Click the ADD button.
The Manual Access Management pop-up window opens.
b. Enter the MAC address and device name for the device that you want to add.
Control Access to the Internet 50 User Manual