Advertisement
Assembly Instructions
Tools needed: philips screwdriver, 5mm allen key,
6mm allen key, 8mm allen key, 8mm socket,
13mm socket
1
Use the four M8x12 Phillips Countersunk Screws from bag
P4 to mount the TV Mounting Brackets to the back of your
television. Please be aware that the supplied screws may
not fit your television. Ensure that you have the
appropriate TV mounting screws before continuing.
Tighten until secure.
2
Use the four M8x12 bolts, nuts and washers from
bag P3 to attach TV Support Arms to the Support
Column. Either the 30" or 36" TV Support Arm can
be used depending on which width suits the installed
TV. Tighten until secure.
3
Use the four M5x12 screws, nuts and washers from bag
P2 to attach the Ceiling Cover to the Ceiling Cover
Brackets. Tighten until secure.
4
Use the four M8x18 bolts, nuts and washers from bag P1
to mount the assembled Ceiling Cover to the Support
Column. Tighten until secure.
5
Advertisement
