Advertisement
Assembly Instructions
9
Programming Wireless Remotes
To program the wireless remote for the control box,
press and hold the reset button on the side of the
control box. While the reset button is held, press
either the up or down button on the wireless remote
once. The reset button can now be released and the
wireless remote is ready for use.
10
Lift Operation
Before operation please ensure that there are no
obstructions in the path of the TV Lift. Once the
wireless remotes are programmed to the control
box, the wireless remote can be used for non-
momentary operation. Press the up button once to
move the lift up and press the up or down button to
stop. To move the lift down, press the down button
once and press the down or up button to stop.
If you'd like momentary control then use the optional
Rocker Switch. To use it, simply plug it into the
control box and hold '2' on the Rocker Switch to
move the lift up and hold '1' to move the lift down.
Rocker Switch
Reset Button
Actuator
Limit Switch
11
External Limit Switch
Please keep in mind this procedure is completely
optional and does not need to be set up in order
for the TV Lift to operate. The external limit switch
stops the lift from moving once it is pressed.
Please note that the external limit switch will only
operate in the extending direction.
Install the switch in a way that it will be
pressed while the lift is moving up and right
before the ceiling cover touches the ceiling.
7
Advertisement
