Related Manuals for progressive automations TY-05-30
Summary of Contents for progressive automations TY-05-30
-
Page 1: Table Of Contents
TY-05-30 / TY-05-40 User Manual Contents Page 2 Caution/Liability Page 3 Dimensions in Inches Page 3 Specifications Electronics Hardware Page 4 Page 5-7 Assembly Instructions... -
Page 2: Caution/Liability
Caution Make sure no obstacles are in the lift's path. Make sure the lift is not touching any walls. Make sure all cords are appropriate length to accommodate the change in height. Keep children away from electric TV lift, control units and remotes. There is a risk of injury and electric shock Keep all electrical components away from liquids. -
Page 3: Dimensions In Inches
12.5 + Stroke Length + Stroke Length 35" for a 30" stroke 45" for a 40" stroke Specifications Model: TY-05-30 TY-05-40 40" Stroke = 40" Tall TV Maximum Height: 30" Stroke = 30" Tall Wall Mount Measurements: 700mm x 500mm... -
Page 4: Electronics Hardware
Electronics Rocker Switch (Wire 35") Control Box External Limit Switch (Wire 60") Wireless Remotes Hardware Ceiling Cover Ceiling Cover Brackets Actuator Mounting Bracket TV Support Arms 30" TV Mounting Brackets TV Support Arms 36" Track Linear Actuator Support Column Purpose Name Quantity Hex Bolt M8x18... -
Page 5: Assembly Instructions
Assembly Instructions Tools needed: philips screwdriver, 5mm allen key, 6mm allen key, 8mm allen key, 8mm socket, 13mm socket Use the four M8x12 Phillips Countersunk Screws from bag Use the four M5x12 screws, nuts and washers from bag P4 to mount the TV Mounting Brackets to the back of your P2 to attach the Ceiling Cover to the Ceiling Cover television. - Page 6 Assembly Instructions Use the Actuator Mount Bracket, Clevis Pin and Cotter Pin from Now that your Drop Down TV Lift is assembled you can attach bag P6 to mount the top portion of the Track Linear Actuator to your TV Mounting Brackets to the TV Support Arms using the your installation.
- Page 7 Assembly Instructions External Limit Switch Programming Wireless Remotes To program the wireless remote for the control box, Please keep in mind this procedure is completely press and hold the reset button on the side of the optional and does not need to be set up in order control box.