Mantracourt DSC User Manual page 57

CTN tempco n-points
CT1..5 tempco Temp points
CTG1..5 tempco gain-adjust
CTO1..5 tempco offset-adjust
Table Key
".." - Denotes a range (e.g. CLK1..7 means "CLK1" to "CLK7")
Access RW/RO/WO/X = read-write / read-only / write-only / execute
Datatype float/int/byte/– = 4-byte real / two-byte integer / 1-byte integer / none
MB reg = register number for MANTRABUS protocol
MD reg = start register address (always odd) for MODBUS protocol
NOTES:
All Modbus accesses are in register pairs, Modbus addresses are just (2*MANTRABUS)+1
Micron Meters DCell & DSC User Manual
byte RW
float RW
float RW
float RW
110 221
111..115 223..231
116..120 233..241
121..125 243..251
56