Viewing Device Data; Instrument Explorer Parameter List - Mantracourt DSC User Manual

Viewing Device Data

The following main parameter list should now appear in the central pane.

Instrument Explorer Parameter List

When an instrument has been selected from the Select Instrument Window this parameter list window will become
populated.
The parameters and commands which are available for the selected device will appear in this list in a structured
hierarchic manner enabling the user to expand or contract categories by clicking the
the list.
There are four types of parameters and commands:
Read/write Numeric – These parameter values are displayed in the right
hand column and can be edited by clicking the value.
The value can then be changed and pressing the Enter key or moving away
from the edited value will cause the new value to be written to the
device. There are no checks on the data entered and it is up to the user
to enter the correct data.
Read-Only – These parameter values are displayed 'greyed out' and
cannot be changed.
Micron Meters DCell & DSC User Manual
and buttons on the left of
14