Installation
12
Lift back-plate off
of the SPIN reader,
and place it with
the screws.
13
The center portion of the
SPIN reader can be lifted
up and rotated to match
the desired Card-Swipe
orientation, and placed
back into the recess.
Make sure that the
swipe-bar cable is not
pinched between the
two pieces.
Before re-attaching
14
the back plate, route
the swipe-bar cable to
the outside of the
center guide-posts.
DOC-WR-SPIN-INST
www.heartlandMicroPayments.com
10