Cadet BTF Owner's Manual page 4

INSTALLATION INSTRUCTIONS
A
B
120 Volt LEFT SIDE
Proceed to OPERATING INSTRUCTIONS.
DOUBLE POLE (4-WIRE) BTF2 - 240/208 or 208 VOLT
B
B
A
A
240/208 Volt LEFT SIDE
Proceed to OPERATING INSTRUCTIONS.
C
A
D
120 Volt LEFT SIDE
Proceed to OPERATING INSTRUCTIONS.
SINGLE POLE (2-WIRE) BTF1 - 120 VOLT
A.
C
wire to the red thermostat
wire.
B.
stat wire to the black heater
wire.
C.
supply wire to the white heater
wire.
DO NOT
CUT!
Tuck all the wires back into
the individual wiring compart-
ments, and make sure the
connections are tight. Attach
with small screw at bottom.
A.
thermostat wires to the two
loose heater wires.
B.
supply wires to the two red
thermostat wires.
Wrap supply (white) wire
with black tape to identify it
DO NOT
as hot!
CUT!
Tuck all the wires back into
the individual wiring com-
partments, and make sure
the connections are tight.
Attach with small screw at
bottom.
DOUBLE POLE (4-WIRE) BTF2 - 120 VOLT
A.
wire labeled L2 to the black
thermostat wire labeled OFF.
B
B.
supply wire to the white heater
wire.
C.
to the remaining red thermostat
wire.
D.
DO NOT
thermostat wire to the remain-
CUT!
ing heater wire.
Tuck all the wires back into the
individual wiring compartments,
and make sure the connections
are tight. Attach with small
screw at bottom.
4
Connect the hot supply
Connect the black thermo-
Connect the neutral (white)
Connect the two black
Connect the two hot
Connect the red thermostat
Connect the neutral (white)
Connect the hot supply wire
Connect the remaining black
B
A
C
120 Volt RIGHT SIDE
B
A
240/208 Volt RIGHT SIDE
D
C
B
120 Volt RIGHT SIDE
A
B
A