Summary of Contents for Cadet Energy Plus CEC163TW
Page 1
MORE COMFORT, LESS ENERGY Thank you for your purchase! Question or problem? Let us solve it with a single phone call, email or online chat! We’ll save you a trip back to the store! Cadet Customer Service Phone: 855.CADET.US (855.223.3887) email: customerservice@cadetheat.com...
IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before install- 6. To disconnect heater, turn control(s) ing or using this heater. to off, and turn off power to heater 2.
3. DO NOT install the heater directly or use gasoline or other flammable above bathtub or sink. DO NOT vapors and liquids in the vicinity of install in shower stall area. Cadet the heater. recommends installing your heater at 8. Connect grounding lead to grounding least 2 feet (61 cm) away to prevent screw provided.
¾" (1.9 cm) Min. INSTALLATION INSTRUCTIONS TIPS BEFORE YOU BEGIN • Verify power has been turned off before starting any work! • The Energy Plus can only be mounted with the element up. It cannot be mounted in the ceiling or in the floor.
INSTALLATION INSTRUCTIONS INSERT THE HEATER ASSEMBLY IN THE WALL CAN STEP 4 Wire connections 1. Your heater has two connection wires on the side. Your supply wire has two connection wires and a supply ground wire. wall can . Connect supply ground wire to grounding screw in wall can (See Figures 3 and 4).
Owner’s ment. Guide and follow the instructions. Failure to properly 5. In the event Cadet elects to replace any part of maintain the heater will void any warranty and may your Cadet product, the replacement parts are sub- cause the heater to function improperly.
Page 7
OPERATING INSTRUCTIONS 1. Make sure all wires are properly 2. Do not operate without grill. connected and installation is com- 3. Do not tamper with the high-tem- plete before you turn on the heater. perature safety shutoff. Complete installation After installation, turn your heater to the highest setting and let it run for 30 minutes. Some smoking may occur as the element initially burns off residue from manufacturing.
Need help?
Do you have a question about the Energy Plus CEC163TW and is the answer not in the manual?
Questions and answers