All manuals and user guides at all-guides.com
EBKA SoftHeat Thermostat
INSTALLATION INSTRUCTIONS
FOR EBHA SOFTHEAT BASEBOARD
FIGURE 1: Thermostat kit assembly
EBKA
Thermostat
If you are uncomfortable working with electrical appliances, unable to follow these guidelines,
or do not have the necessary equipment; consult a licensed electrician.
WARNING
Turn the electrical power off at the electrical panel board (circuit breaker or fuse box) and lock
or tag the panel board door to prevent someone from turning on power while you are working on
the heater. Failure to do so could result in serious electrical shock, burns, or possible death.
TEL: 360-693-2505 Fax: 360-694-8668 P.O. Box 1675 Vancouver, WA 98668-1675
EBHA Heater
IMPORTANT INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Description
The EBKA-1-24 end cap thermostat kit is an accessory
for the EBHA Series of hydronic baseboard heaters.
This kit will provide thermostatic control of the heater
in place of a wall mounted thermostat.
Note: The EBKA-1-24 end cap thermostat can only
be installed on the left end of heater. It is designed
to control only one EBHA heater unit.
Tools Required: Phillips Screwdriver, Insulated Wire
Connectors (Wire Nuts
®
), Strain relief connector
Junction box cover
Need help?
Do you have a question about the EBKA Series and is the answer not in the manual?
Questions and answers