Important Instructions; Working With Electricity; Required Tools - Cadet BTF Owner's Manual

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed
to reduce the risk of fire, electric shock, and injury to persons, including the
following:
1. Read all instructions before install-
ing or using this thermostat.
2. Use this
described in this manual. Any
other use not recommended by
the manufacturer may cause fire,
electric shock, or injury to persons.
3. Do not insert or allow foreign ob-
jects to enter any ventilation or ex-
haust opening as this may cause an
electric shock or fire, or damage the
heater or thermostat.
SAVE THESE INSTRUCTIONS
If you are uncomfortable working with electricity, running electrical supply wire
or installing a circuit breaker, please consult a licensed electrician.
Unanswered questions? Call our technical support team in Vancouver,
Washington at 855.223.3887 or outside the USA 360.693.2505.
Wire Strippers
thermostat only

WORKING WITH ELECTRICITY

REQUIRED TOOLS

Volt Meter
2
4. To disconnect thermostat turn off
power to heater circuit at main dis-
as connect panel.
5. Do not operate any thermostat after
it malfunctions. Disconnect power
at main disconnect panel and have
thermostat inspected by a qualified
electrician before reusing.
6. A thermostat has arcing or sparking
parts inside. Do not use in areas
where gasoline, paint, or flammable
liquids are stored.
Wire
Connectors and Phillips
Screwdrivers
Straight ½" Cable Clamp
Connector