Night Owl WNVR201 Series User Manual page 34

Connecting and Adding your Device
NOTE: When adding a new device, it may take 5–10 minutes before you begin receiving notifications.
A device can be added to the Night Owl X app by using the application's Smart Auto Detection or through
a QR Code Setup. With Smart Auto Detection, your NVR will automatically be detected by the Night Owl X
software, making connecting easy! To use this preferred method, ensure your Smart Device and NVR are both
on the same network.
Adding a Device
4
To begin adding a new device, first select the
yellow plus sign within the Device menu.
Smart Auto Detection
4A
If your Smart Device and NVR are on the
same network, the Smart Auto Detection
will auto find your NVR. If this method
is not available, please use the QR Code
Setup from step 4B below.
QR Code Setup
4B
To use the QR Code Setup, select Setup
device by QR Code and hover your Smart
Device camera lens over the QR Code
located on the top right corner of your NVR.
WIFI
Ethernet Cable
34