Hach SC1000 Instruction Sheet page 4

sc1000 Panel Mount Bracket
Optional bulkhead connector installation
The optional bulkhead connector (Cat. No. 71211-00) is available for separate purchase for
mounting on panels of ¼-inch or greater thickness.
1. Thread the isolator washer
2. From the display module side of the panel, thread the isolator washer
1 Lock nut (probe module side)
2 Lock washer
3 Isolator washer
Replacement parts
Description
Strain Relief
Optional parts and accessories
Description
Connector, bulkhead
Extension Cable, 15 m
FOR TECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:
In the U.S.A. –
Outside the U.S.A. –
On the Worldwide Web –
© Hach Company, 2006 All Rights Reserved. Printed in the U. S. A.
lock washer (Figure 3, item 2) and lock nut
of the panel and hand-tighten.
Figure 3 Optional bulkhead connector (Cat. No. 71211-00)
Call toll-free 800-227-4224
Contact the HACH office or distributor serving you.
www.hach.com ; E-mail –
(Figure 3, item 4) onto the connector, noting the orientation.
(Figure
4 Isolator washer
5 Bulkhead connector housing
6 Mounting panel
techhelp@hach.com
(Figure
3, item 1) onto the probe module side
Quantity Catalog Number
1 6128701
Quantity Catalog Number
1 7121100
1 5796100
HACH COMPANY
WORLD HEADQUARTERS
Telephone: (970) 669-3050
FAX: (970) 669-2932
Edition 1 June 2006 te/dk
3, item 3),