Introduction; Attaching Yoke To Luminaire - Compulite Luna User Manual

L u n a a n d N o va Y o k e s

Introduction

Luna and Nova yokes have a self-locking system, last position memorization,
programmable pan and tilt limits, and an internal power supply. They are quiet
and extremely accurate. Luna's maximum load is 15 kg. Nova's maximum load
30kg.
Luna and Nova use servo controlled 24 VDC motors with mechanical overload
protection (torque limiter and friction clutch) for both the X and Y axes.
The self-locking mechanism can be overridden manually.
Pan is default enabled for 360 degrees. Tilt is default enabled for 270 degrees.
There are electronic stoppers for pan and tilt, which are manually programmed.
Any time a control key is pressed the yoke's travel is interrupted for
approximately 15 seconds.

Attaching Yoke to Luminaire

Keypresses
1. Attach the adapters on
each Yoke arm to the
fixture using 2 M6
screws.
Doc. Version 1.01
Results/Comments
One of the adapters contains a stopper and the
other contains the clutch.
For the adapter containing the stopper: DO
NOT remove from the potentiometer axis.
Removal from the axis can result in a loss of
orientation and cause serious damage.
For the adapter containing the clutch: DO
NOT remove the 3 bolts that hold this adapter.
Compulite Systems (2000) 4