E-Z-GO FLEET 1999 Technician's Repair And Service Manual page 108

CONTINUOUSLY VARIABLE TRANSMISSION (CVT)
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notes, Cautions and Warnings
Fig. 3 on page J-4). The belt may then be rolled off the
driven clutch.
Fig. 3 Removing the Drive Belt
Page J-4
Drive Belt Service
The drive belt will require no service unless the vehicle
has been operated in an extremely dusty or muddy loca­
tion in which case it should be washed with plain water. If
the belt becomes frayed or badly worn, it must be
replaced.
STORAGE
If the vehicle is to be out of service due to off season
storage, the clutches should not be coated with any pro­
tecting spray. The drive clutch sheaves may develop
some surface rust which will be removed within a few
minutes of running time. The driven clutch is aluminum
and requires no treatment.
TOWING
The vehicle may be towed. Should the vehicle need to be
moved without using the engine, use the neutral lock as
described in Sections 'A' and 'B'.
Repair and Service Manual