How To Change Programmed Operation Times; 10. How To Clear Programmed Operation - Sanyo RCS-SH80UA Instruction Manual

9.

How to change programmed operation times

1 In the ordinary indicator mode, press the PROGRAM button.
2 Press the DAY button to move the operation reservation indicator (
times of which you want to change.
3 Press the SET button.
4 By pressing the SET button, times indicators blink in turn in the order described below. Make the time to
change blink.
5 Press the HH or/and MM button to change the time.
6 Press the SET button.
7 Press the PROGRAM button to complete the change.

10. How to clear programmed operation

• How to clear programmed days
1 Press the PROGRAM button.
2 Press the DAY button to move the operation reservation indicator (
be cleared.
3 Press the CLEAR button.
3
The programmed times for the day will turn off.
4 Press the PROGRAM button.
The operation reservation indicator (
• How to clear a program of a day
1 Press the PROGRAM button.
2 Press the DAY button to move the operation reservation indicator (
be cleared.
3 Press the SET button.
4 Press the SET button again to make the ON-time or OFF-time of the program to clear blink.
5 Press CLEAR button.
The program will be cleared and programs left will be automatically arranged to fill the cleared program.
6 Press the PROGRAM button.
3 - 12
) will turn off.
) to the day the programmed operation
) to the day the program of which should
) to the day a program of which should
OI-432-03 - 12EG