Operation - Sanyo RCS-SH80UA Instruction Manual

STEP 5
NOTE
To warm up the system, the power mains must be turned on at least five (5) hours before operation.
STEP 1 To start the air conditioner
Press the operation button (ON/OFF button).
STEP 2 Setting the mode
Press the MODE button to select the mode of your choice.
[
STEP 3 Setting the fan speed
Press the FAN SPEED selector button to select the fan speed of your choice.
[
If AUTO is selected, the fan speed switches automatically.
STEP 4 Setting the temperature
Use the
(
STEP 5 Setting the airflow direction
When more than one indoor unit is connected, the UNIT button is used first to select a
unit. Then use the FLAP button to set the airflow direction to a specific angle or to
sweep. (Refer to the description of the remote control unit.)
STEP 6 To stop the air conditioner
Press the operation button (ON/OFF button) again.
OI-432-01 - 9EG

Operation

(AUTO), (HEAT), (DRY),
(AUTO), (HI.), (MED.) or
or button as appropriate to change the temperature setting as desired.
reduces the temperature, and
(COOL) or (FAN)]
(LO.)]
increases the temperature.)
STEP 1, 6
STEP 3
STEP 2
STEP 4
1 - 9
1